About Corocool
- Anti Corrosive
- Nano polymer based
- Water Soluble
- Bio Degradable
- Thermal Insulation
- Waterproofing
Corocool is a nano-polymer based product, which when mixed with water is used to coat iron and civil surfaces without the need of a primer coat. Simply mix water with Corocool and apply on to any surface without the need for any extensive preparation.
- Two Coats of Corocool gives you
- Corrosion Resistance
- Thermal Insulation
- Waterproofing
- And, all this without any:
- Primer Coat
- Petroleum Solvent
- Toxic Material
MORE ABOUT BIO-EDGE COROCOOL
- COROCOOL protects the iron components against corrosion, degradation due to moisture, salt spray, oxidation or exposure to various weather conditions and industrial chemicals.
- COROCOOL is used for preservation of structural civil /steel work against acid fumes and adverse weather conditions.
- COROCOOL is Polymer modified, Flexible, Elastomeric Coating. It is water soluble and bio-degradable.
- Before application COROCOOL powder is mixed well with water and applied on a clean surface.
- COROCOOL also helps arrest sweating in the tanks.
- COROCOOL can be easily applied in the form of slurry with a brush, spray or squeegee. Hence, it is ideal for tanks, spheres, pipelines, water tanks, civil structures etc.
- COROCOOL has a very high tensile adhesion strength and is UV resistant.
- The thermal property of COROCOOL insulates the surface hence evaporation loss and energy loss due to temperature variation is low.
- COROCOOL also works as a waterproofing agent by acting as a sealant for cracks in surfaces.
- COROCOOL complies with the guideline given in EN 14891, ASTM D5385, EN 1348 and DIN 1048.
EnduroGrout CGBM
Cement Grout Bituminous Mix (CGBM) is a Jointly Developed technology for the first time in the country along-with CSIR-CRRI, NEW DELHI as a fast track project from Government of India Fy 2016-2017.
On successful trials and 2 years of performance study by CRRI codes were established in FY 2019 (IRC SP 125)
The Performance has now been Tested by CRRI for more than 7 Monsoon Years without any kind of Distress, Conventional Pavements laid at the same time has been repaired and re-laid more than once already.
Primary benefit comes from Stopping the Water Ingress into the Bituminous Layer. It provides much better Durability and Maintenance Free Pavement for long term duration. 7 Monsoon seasons have already passed without any distress in two Roads in Surat.
The technology provides an Alternative Economical Solution, which is almost (3-5 times Cheaper) than the Cement Concrete Pavements and Extremely low Life Cycle Cost despite of having initial cost of 20-40% higher with respect to bituminous wearing course with negligible maintenance cost for 7- 8 years for flexible pavements.
PRODUCTS
Bioedge Industries deals in a wide range of petroleum and petrochemical products used in the manufacture of aerosols, insecticides, pesticides, lubricants, metal-cleaning and a host of other applications. Our products adhere to quality standards and test specifications which ensures buyers are delivered products tailored to their specific operations and requirements.
We also source petroleum products directly from PSU & private refineries for customers thus ensuring effective pricing and quality.
Our Product list includes:
- Navajyoti RH-100
- Navajyoti RL-50
- Furnace Oil
- LDO
- Reclaimed Base Oil
- Base Oils
To know the specifications of our products, please download our catalogue.
Navajyoti RH-100
Navajyoti RH-100 is used as a solvent, a basic material in the manufacture of surfactants, in the manufacture of metalworking compounds, lube oil components, plasticizers and chlorinated Paraffin, production of oils for aluminium cold rolling, catalyst carrier for olefin polymerization, raw materials for a wide range of applications.
| Sr. No. | Parameters | Test Method | Uom | Specification | Results |
|---|---|---|---|---|---|
| 1. | SAYBOLT COLOUR | ASTM D156 | SAYBOLT COLOUR | 29 Min | 29 |
| 2. | SPECIFIC GRAVITY @ 15.56°/15.56°C | ASTM D4052 | NA | 0.76 to 0.78 | 0.7678 |
| 3. | FLASH POINT | ASTM D93 | oC | - | 100 |
| 4. | KINEMATIC VISCOSITY @ 40OC | ASTM D445 | cP | - | 1.56 |
| 5. | C13 PF AND LIGHTERS | UOP 688 | wt % | 15.0 Max | 5.9 |
| 6. | C14 PF | UOP 688 | wt % | 52.0 Min | 75.6 |
| 7. | >C14 PF | UOP 688 | wt % | 32.0 Max | 18.5 |
| 8. | C15 PF | UOP 688 | wt % | - | 14.9 |
| 9. | C16 PF | UOP 688 | wt % | - | 3.0 |
| 10. | C17 PF | UOP 688 | wt % | - | 0.6 |
| 11. | SULPHUR | Wt. ppm | - | 0.3 | |
| 12. | BR. INDEX | ASTM D2710 | Mg Br/100gm | 15.0 Max | 6.2 |
Navajyoti RL-50
Navajyoti RL-50 is a highly paraffinic, highly purified mixture of liquid saturated hydrocarbons obtained from petroleum. It is colourless, tasteless, and odourless when cold. Light liquid paraffin oil highly refined hydro-treated oil has excellent thermal & chemical stability, has high flash point & is soluble in Chloroform & solvent Ether.
Navajyoti RL-50 is used in the manufacture of Anti-static Coning oil, Knitting oil & other Textile Auxiliaries, Plant Spray Oil, Agrochemicals, Aerosols, Dye Intermediates, Paper Industry; Perfumery, Food Grade Speciality Lubricants, Food Grade Plastics used as a Lubricant Plasticizer, Attars, Flavours & Fragrances, Perfumery Chemicals, Speciality Chemicals, Incenses, Personal Care Products, Leather Chemicals, Fat Liquors, Petrochemical Solvents, etc. It may also be used in the manufacture of Pharmaceuticals and Cosmetic Products like Creams, Lotions, Perfumery Industry, Bulk Drugs & Food Industry etc.
| Sr. No. | Parameters | Test Method | Specification | Results |
|---|---|---|---|---|
| 1. | Appearance | ASTM D4176 | Bright & Clear | Bright & Clear |
| 2. | Acidity mg KOH/g | ASTM D3242 | <0.01 Typical | 0.01 |
| 3. | Aromatics as alkylbenzenes mass % | UOP 495 | <0.1 Typical | <0.1 |
| 4. | Bromine Index mg BR/100g | ASTM D1492 | 20 Max | 6 |
| 5. | Color- Saybolt | ASTM D 156 | +30 Typical | +30 |
| 7. | Flash Point (closed cup) °C | ASTM D93 | 35-48 Typical | 41.0 |
| 8. | Non Volatile Matter Mass % | ASTM D1353 | <0.01 Typical | <0.01 |
| 9. | Odour | Sasol 2045 | Neutral | Neutral |
| 10. | Sulphur, mg/kg | ASTM D5453 | 1 Typical | <1 |
| 11. | C08 and Lighter Mass % | INTERTEK/DBN/IHM/058 | <5.0 Typical | 3.3 |
| 12. | C09 Mass % | INTERTEK/DBN/IHM/058 | 32-48 Typical | 38.5 |
| 13. | C10 Mass % | INTERTEK/DBN/IHM/058 | 32-48 Typical | 39.0 |
| 14. | C11 Mass% | INTERTEK/DBN/IHM/058 | 5-30 Typical | 18.9 |
| 15. | C12 And Heavier Mass % | INTERTEK/DBN/IHM/058 | 0.5-2.0 Typical | 0.3 |
| 16. | DP °C | ASTM D86 | 200 Max | 184 |
| 17. | IBP °C | ASTM D86 | 150 Min | 151 |
Furnace oil
Furnace oil is a dark viscous residual fuel obtained from crude distillation unit. As per IS 1593:2018 specification, Furnace Oil is classified into four grades – LV, MV1, MV2 and HV. FO falls under the category of Class C, under PESO classification.
Furnace oil is mainly used for burning applications and generators also.
| Sr. No. | Characteristics | Unit | Method of Test [P] of IS:1448/ISO | Result | Specification |
|---|---|---|---|---|---|
| 1 | Acidity Inorganic | mgKOH/g | ASTM D 974 | NIL | NIL |
| 2 | Ash | wt% | IS 1448 P-4 | 0.035 | 0.1 Max |
| 3 | Gross Calorific Value | cal/gm | IS 1448 P-7 | 9960 | Report |
| 4 | Total Sulphur, % by mass | wt% | ISO 8754 | 3.50 | 4.0 Max |
| 5 | Flash Point (PMCC) | oC | IS 1448 P-21 | 76 | 66 Min |
| 6 | Colour, Visual | Visual | MORE | Report | |
| 7 | Density at 15 Deg C | Kg/m3 | IS 1448 P-16 | 1006.2 | Report |
| 8 | Kinematic Viscosity at 50 Deg C | cSt | IS 1448 P-25 | 100 | 55.0-115.0 |
| 9 | Carbon Residue, mass percent, max | wt% | ISO 10370 | 12.40 | 18.0 Max |
| 10 | Pour Point | oC | IS 1448 P-10 | 0 | +30 Max |
| 11 | Water Content | % vol | IS 1448 P-40 | 0.30 | 1.0 Max |
| 12 | Sediment | wt % | IS 1448 P-30 | 0.05 | 0.2 Max |
Light Diesel Oil (LDO)
Light diesel oil, or LDO, is a blend of components from the crude distillation process. It is used in engines with an rpm less than 750, such as boilers and furnaces. LDO is also referred to as distillate fuel or marked oil. Light diesel oil is used as fuel in many applications: Boilers Furnaces Air pre-heaters Lower RPM engines Lift irrigation pump sets Fertilizers plants, and Bunker DG sets.
| Sr. No. | Characteristics | Unit | Test Method | Result | Specification |
|---|---|---|---|---|---|
| 1 | Appearance | - | Visual | Dark | Dark |
| 2 | Density at 15 Deg C | kg/m3 | IS:1448 [P:16] | 888.2 | - |
| 3 | Kinematic Viscosity at 40 Deg C | cSt | IS 1448 P:25 | 5.313 | 2.5 Min – 15 Max |
| 4 | Flash Point (PMCC) | oC | IS 1448 P-21 | 98 | 66 Min |
| 5 | Water Content | % vol | IS 1448 P-40 | 0.100 | 0.250 Max |
| 6 | Total Sulphur | % Mass | ASTM D 4294 | 1.35 | 1.50 Max |
| 7 | Pour Point Summer | oC | IS 1448 P-10 | 6 | 21 Max |
Reclaimed Oil
Reclaimed oil or Re-refined oil is produced by distillation / processing of Used Lubricants. The product can be used for blending with Base oil and manufature of certain Lubricants with addition of additives.
| Parameters | Test Results |
|---|---|
| Viscosity (B4 CUP METHOD) | 20seconds |
| Density | 0.85 |
| Saybolt Color | 1.5-2.5 |
| Visual | Clear & bright yellow |
Base Oil
Base oil SN 500, SN 150, SN 100, SN 70, Bright Stock are offered at a market determined price.
Base oils are used to manufacture products including lubricating greases, motor oil and metal processing fluids. Different products require different compositions and properties in the oil. One of the most important factors is the liquid’s viscosity at various temperatures.
The American Petroleum Institute (API) has 5 base oil designations. The first three groups are derived from crude oil (mineral oil); Group IV base oils are fully synthetic; Group V is for all other base oils not included in Groups I through IV.
| Sr. No. | Parameters | Test Method | Unit | Range | Result |
|---|---|---|---|---|---|
| 1. | Appearance | Visual | - | Clear & Bright | Clear & Bright |
| 2. | Odour | - | Not Objectionable | Not Objectionable | |
| 3. | Color | ASTM D-1500 | <0.5 | <0.5 | |
| 4. | Moisture | Crackle Test | Nil | Nil | |
| 5. | Kinematic Viscosity @100oC | ASTM D – 445 | cSt | 2.0-3.5 | 2.950 |
| 6. | Kinematic Viscosity @40oC | ASTM D – 445 | cSt | 6.0-14.0 | 11.820 |
| 7. | Viscosity Index (VI) | ASTM D-2270 | 95-105 | 100 | |
| 8. | Denisty @29.5 oC | ASTM D-4052 | gm/cc | 0.824-0.839 | 0.8314 |
| 9. | Flash Point | ASTM D-92 | oC | 155-194 | 192 |
| 10. | Pour Point | ASTM D-97 | oC | -22 | -27 |
| 11. | TAN | ASTM D-974 | mgKOH/gm | 0.01 | 0.01 |
ABOUT BIO EDGE
Bio-edge Industries, founded in 2017, is a manufacturing & trading firm with a manufacturing unit located at Wada and registered office in Kandivali West, Mumbai, India.
We provide specialized petroleum products, petrochemicals & chemicals tailored to suit a wide variety of processes. Our products include LDO, FO, Base Oils, Reclaimed Oil, Tyre Oil, MTO substitute, Biodegradable lubricants, Anti-corrosive coating powder and Normal Paraffins.
These products adhere to highest quality standards and are delivered as per specifications. We also supply products from refineries of all the major oil companies.
We manufacture Corocool from component level raw materials. The production capacity is approximately 300MT per month. Our roster of customers and prospective clients is spread across a vast array of sectors including infrastructure, real-estate, government authorities, electricity boards, shipping, factories, warehouses, oil companies etc. As on 2023-24 we are entering international markets to further market our product.
Additionally, we also supply niche additives that help organizations to improve the quality of the fuel and raw material used in their manufacturing processes.
We also conduct Energy Audit of our clients manufacturing units by assessing their energy requirements and processes and helping them find superior alternatives in terms of efficiency, costing as well as environmental impact.
CONTACT US
Do you have any questions? Lets talk!
+91 99204 94214
nilesh@bioedge.in
113, Sona Shopping Center, Trikamdas Road, Kandivali West, Mumbai – 400067